Description

Catalytic Scrubber

catalytic scrubber

Catalytic scrubber is important to remove toxic gases and make the pollutants into simple non-hazardous components. Apzem developed a catalytic dry scrubber for this purpose. The catalytic scrubber works on principle of chemisorption process. Chemisorption is an adsorption process which involves chemical reaction between the toxic pollutants and chemical present on the surface of adsorbents. This type of scrubber consist of catalyst which adsorbs the gaseous pollutants and reacts with them to make into simple components. Unlike normal adsorption dry scrubber, the catalytic scrubber will not be affected by contact time and inlet pollutant concentration. When the catalyst is saturated with pollutants, this can be easily taken back and replace with new catalyst. This type of scrubber is suggested for exhaust with low concentration of toxic gases, because of life time of catalyst. It can also be used for exhaust with high concentration. However, the catalyst will be saturated within a short period of time. It can also be used for emergency applications, where there is higher pollutant contamination risk.

FEATURES

Performance Guaranteed
Low maintenance
Low pressure drop, Minimal energy cost
No water, ETP is not required
No hazardous by-product

APPLICATIONS

Performance Guaranteed
Low maintenance
Low pressure drop, Minimal energy cost
No water, ETP is not required
No hazardous by-product

TECHNICAL SPECIFICATIONS

flow Air rate: 100 to 1200 Standard liter per minute (slm) or (6 to 72 Cubic meter per hour)
Concentration: 1 ppm to 200 ppm (continuous) up to 2000 ppm (Intermittent)
Removal efficiency: up to 99.99 %
Material of Construction: MS with Epoxy lining
Construction: Heavy Gauge, Fully welded cabinet, robust construction

Dimensions

Model	Air flow rate (CFM)	Dimension Diameter (mm)	Height (mm)
ADS-30	100	300	1400
ADS-45	300	450	1500
ADS-60	500	600	1500
ADS-75	800	750	1650
ADS-90	1000	900	1700
ADS-105	1500	1050	2000